On this page you can find a growing series of articles that focus on our Ecospeed coating.
Dispensing with cathodic protection (part 2)
(This is Part 2 of a 2-part article on the subject of the coatings that replace cathodic protection. Part 1 can be found by clicking
Ecospeed solves corrosion of scrubber pipes and outlets
At the start of 2016, the inside of a scrubber was coated with Ecospeed for the first time. Since then, our coating system was applied
Dispensing with cathodic protection (part 1)
(This is Part 1 of a 2-part article on the subject of the coatings that replace cathodic protection. Part 2 can be found by clicking
Protecting scrubbers: Why Ecospeed is the best solution
The rising use of exhaust scrubber systems across maritime fleets has led to a hidden problem: severe corrosion of mild‑steel scrubber pipes, outlets, diffusers, recycle
Watertaxi Rotterdam finds a workable hull coating in Ecospeed
The city of Rotterdam benefits greatly from a unique, well-organized system of waterborne passenger transport: Watertaxi Rotterdam (WTR). Only recently has WTR found the right
Ecospeed protection for Norwegian energy-efficient sightseeing ferry
Last month the energy-efficient sightseeing ferry MS Brisen was baptized in Oslo, Norway. The carbon fibre vessel was built at the Brødrene Aa shipyard in
Advantages of a cleanable hull coating (part 2)
(This is Part 2 of a 2-part article on the subject of ship hull cleaning for maximum fuel efficiency. Part 1 can be found by
Largest US-built aluminum pilot boat protected with Ecospeed
When pilot boat Spindletop was delivered its underwater deep V-bottom hull was coated with Ecospeed to protect the vessel against corrosion. The 27.4-meter boat was
Ice-class coating in a class of its own
For many years, Ecospeed has been a leading ice-class coating, certified by class as ice-abrasion resistant and qualifying ships using it for reduced scantlings. The
Advantages of a cleanable hull coating (part 1)
(This is Part 1 of a 2-part article on the subject of ship hull cleaning for maximum fuel efficiency. Part 2 can be found by
Ecoshield application on first Hull Vane for the Royal Netherlands Navy
In May Ecoshield was applied to the Hull Vane intended for an ocean-going patrol vessel or OPV. Application was done by Straalbedrijf Schep en zonen
Ecospeed coatings – easy and quick to apply
There are several factors that make one coating easier to apply than another: the preparation required: the coating scheme itself – many layers of different
Our new monthly magazine is now available.
In it you can find information on recent Subsea Industries projects and developments.